AIR DIE GRINDER 6MM 14 PIECE KIT BLOW MOULD CASE
Click Image for Gallery
Die grinder kit
![](images/aircraft/at0007_sm1.jpg)
Professional grinder kit giving complete flexibility for most grinding and polishing needs.
The die grinder has non-variable speed set to 25 000 rpm.
A compressor is required with an air flow delivery of at least 115 l/min at 6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
Included in the kit:
- 10 grinding points
- Ø 3.2mm collet
- Ø 6mm collet
- Spanner/wrench
- ¼' connector
Features:
- Lightweight
- Small size
- Includes 3.2mm reducing collet
- Low air consumption
- In carry casse
Application:
- Polish rough edges
- Remove rust on steel
Description | Specification |
Working pressure | 6.3 Bar |
Free speed | 25 000 rpm |
Average air consumption | 115 l/min |
Suggested minimum compressor HP | 2 HP |
consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
![]() |
![]() |
![]() |
![]() |
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|